Grade Setup

The grade setup defines what is graded in a course and which values are valid. It is managed on the course's Grades setup tab, which lists every grade as <label> - <weight>% with an Add partial entry at the end. Changes save as soon as a field loses focus; there is no Save button.

The Final Grade

Every course is created with one final grade, labelled "Final grade". It cannot be deleted and has no weight. Its scale starts from the institution's default scale (see Grade Settings).

The final grade's page has the scale fields described below, plus:

Field Purpose
Pass grade The value a student needs to pass. Only checked against the scale on a continuous scale, where it is also rounded to the scale's decimal places and must lie between the minimum and maximum.
Automatically assign the Grade Status Whether the grade status is set from the pass grade when a final grade is entered. Options: Use the institution default (On/Off), On, Off. Only available on a continuous scale.

With automatic assignment on, entering a final grade sets the status to Pass when the grade is at or above the pass grade (at or better, when a lower grade is better), Fail below it, and back to unknown (no status) when the grade is cleared. A resit grade counts when it replaces the original. Only pass, fail and unknown are set this way. A published final grade is never changed.

Note: Saving a new pass grade, or switching the course to On, re-applies the rule to every student who already has a final grade. Switching it to Off leaves the statuses already set in place.

Partial Grades

Partial grades are the components of the course result, such as an exam or coursework. To add one, select Add partial and fill in:

Field Purpose
Name The label shown as the gradebook column header.
Type Value for a grade entered by hand, or Formula for a calculated one.
Weight The share of the course result, in percent. Defaults to 50.

Select Create partial to add it. A partial's page has Name, Weight and the scale fields. Delete partial grade removes the grade and every value entered for it on the course's registrations.

Warning: Deleting a partial grade is immediate and removes its values from every student in the course. There is no confirmation step.

The weights drive the Calculated Grade column in the gradebook: the sum of each partial's grade multiplied by its weight. The calculated grade is a guide only; the final grade is still entered separately.

Formula Grades

A formula grade is a partial whose value is calculated from the other grades of the course. Its page has a Formula field for the expression. The expression refers to other grades by their name and supports arithmetic, for example:

(Exam * 0.6) + (Coursework * 0.4)

How formulas behave:

  • A resit replaces the original grade in the formula when it is at least as good.
  • A missing grade counts as 0, or as the scale's maximum when a lower grade is better, so an empty exam never improves the result.
  • Formula values cannot be typed in the gradebook. They are recalculated every time a student's registration is saved, and for every student of the course whenever a grade's settings are saved.

Scales

Every grade has a scale, chosen with Scale type.

Scale type Valid values Fields
Continuous Any number between a minimum and a maximum Grade direction, Minimum, Maximum, Decimal places
Discrete Only the numbers in a list, for example 0, 1, 2, 3, 4, 5 Grade direction, Range
Qualitative Only the labels in a list, for example A, B, C, D, E, F Range

Continuous scales default to 0 to 100 with 2 decimal places, or to the institution's defaults when they are set. A value outside the scale is rejected with a message such as "Grade must be between 0 and 100" or, on a discrete scale, "must be one of" followed by the list.

Grade Direction

Grade direction is Higher is better or Lower is better. Lower is better suits scales such as 1.0 (best) to 5.0 (worst). The minimum is then the best grade and the maximum the worst, and every comparison follows that direction: pass grade, resit replacement, formula defaults and the calculated grade.

Qualitative scales have no direction.

Resit Cap

When the institution has resit grades on, continuous scales also show:

Field Purpose
Resit Grade Cap Type Use institution default by setting, Grade Maximum or Previous Grade.
Resit Grade Cap (Percentage) How far a resit may go. Leave empty for no limit.

With Grade Maximum, the cap is that percentage of the scale's maximum. With Previous Grade, it is the original grade plus that percentage of itself. When a lower grade is better, the cap works as a floor instead. See Entering Grades for how the cap applies.

Grades From Other Tools

Some grades are filled by an integration and lock parts of the setup:

  • LTI grades come from an external tool. Their scale must be continuous and its fields cannot be changed, and they cannot be deleted.
  • Canvas grades, when Canvas grade sync is on, arrive as partial grades whose fields are all locked. Add partial is hidden on courses that have them, and the final grade page shows the last sync.

Permissions

Opening Grades setup needs the permission to change the grade setup. Without it, staff and lecturers can still use the gradebook if they hold the grades permissions. See Grades.